The frame pieces are meticulously packed in a foamed insulated carry case to ensure your DreamFlats stays in pristine condition for every session.

Each DreamFlat comes in an easy-to-carry, transport-friendly case containing five lightweight aluminum pieces: two collapsible frame sections, two sturdy frame feet, and a center support pole. Everything you need for a quick and effortless setup—wherever your shoot takes you.

DreamEasy DreamFlat Frames are designed for quick and hassle-free assembly—no tools required!

Step 1: Remove the DreamEasy DreamFlat frame sections, support pole, and two feet from the carrying case. Lay out all the pieces.

Note: Remove the small L-shaped cardboard protectors from the corners of the frame sections. These prevent damage during shipping and can be discarded. Also, remove the yellow protective tubes from the pegs on each foot.

Step 2: Locate the frame section labeled “BOTTOM” and unfold it, making sure the grey PVC ends are facing upward.

Step 3: Align the feet so that the pegs face outward and the holes face inward toward the center of the frame. Place the bottom frame section over the feet, align the holes, and press down firmly to secure.

Note: Make sure the spherical protrusion on the bottom of the frame fits into the hole on the foot to keep it positioned perpendicular to the frame.

Step 4: Find the frame section labeled "TOP" and unfold it, positioning it with the grey PVC ends facing downwards.

Step 5: Connect the top and bottom frame sections by inserting the grey plastic end connectors of the top section into those of the bottom section.

Step 6: Insert the center support pole into place for added stability.

Step 7: Your DreamEasy Silicone Edge Backdrop comes with a thin silicone strip sewn along its edge. To install, gently insert the silicone edge into the recessed groove around the inside of the frame, ensuring it fits securely and smoothly.

Note: See below for more detailed instruction.

Silicone Edge Backdrops are made for the DreamEasy DreamFlat System. They are made from our exclusive DreamEasy material which is a silky-soft, wrinkle-free polyester. We print the backdrop design using dye sublimation, a premium printing technique that infuses the ink directly into the fibers of the polyester, creating a brilliant finish that is scratch-resistant and tear-resistant. DreamEasy Silicone Edge Backdrops are also simple to install and remove. They come with a hemmed, sewn in silicone edge that is made to fit into our DreamEasy DreamFlats. Silicone Edge Backdrops are available in sizes that work with the DreamEasy DreamFlat Backdrop System; 3x6', 3x7.5', 4x7.5', 5x7.5', 7.5x5', 7.5x8', 7.5x10', 7.5x12' and 7.5x20' sizes.

See below for instructions on how to install a DreamEasy Silicone Edge Backdrop into the DreamFlat Frame.

are Luxe Sandstone One Skinny (LL) (top right) and Skinny Mother of Marble One (CC) (top left and bottom images).

Step 1: Locate the small white tab on one of the short ends of the backdrop. This is the bottom of the backdrop.

Step 2: Starting with the corners, install the Silicone Edge Backdrop by inserting the silicone beading into the channels on the DreamFlat Frame.

Note: Be sure to not install the silicone beading into the channel with the beading showing. The fabric should wrap around the silicone strip.

Step 3: Once all four corners are installed, start at the middle of each frame extrusion, tucking the silicone beading into the channel and working toward the corners.

Step 4: To remove, pull the small white tab on the bottom of the backdrop. Pull one side of the backdrop out of the channels on the frame.

Backdrops are Luxe Sandstone One Skinny (LL) (top right and bottom images) and Skinny Mother of Marble One (CC) (top left).

The DreamEasy DreamSweep expands your DreamEasy DreamFlat setup into a seamless, floor-to-wall sweep — no tools required!

Follow these steps to assemble and attach your DreamSweep to two connected DreamFlats.

Step 1: Assemble the DreamFlats.
Assemble two DreamEasy DreamFlat frames following the standard instructions. Use the 180-degree straight connector to connect the two frames side-by-side, creating one continuous wall.
For an 8 × 14 ft DreamSweep, use two 4 × 7.5 ft DreamFlat frames.
For a 10 × 16 ft DreamSweep, use two 5 × 7.5 ft DreamFlat frames.

Step 2: Unpack the DreamSweep Components (Figure 1).
Remove all DreamSweep parts from the carrying case and lay them out.
You should have:
• 2 bars with corner PVC connectors and receiving ends
• 2 bars with corner PVC connectors and insert ends
• 3 short bars with insert and receiving ends
• 1 short bar with insert and receiving ends (for back wall)
• 1 long bar with insert and receiving ends
• 1 long bar with insert and receiving ends (for back wall)
• 1 long bar with dual receiving ends
• 1 long bar with dual receiving ends (for back wall)
• 2 corner brackets (left and right)
• 14 hand tighten screws

Step 3: Assemble the Frame Base (Figure 2).
Locate the three bars that do not have a channel:
• 1 short bar with insert and receiving ends
• 1 long bar with insert and receiving ends
• 1 long bar with dual receiving ends
Connect these three bars together to form the central base section. Use the hand-tighten screws to secure each bar connection.

Step 4: Connect the Corners and Side Sections (Figure 3).
• On the right side, connect: corner (insert) → short insert/receiving → corner (receiving). 
• On the left side, connect: corner (receiving) → short insert/receiving → corner (insert).
• Along the front edge, connect: long insert/receiving → short insert/receiving → long dual-receiving.
Ensure all joints are fully seated and hand-tightened.

Step 5: Attach to the DreamFlat Wall (Figure 4).
Position the completed DreamSweep ground frame at the base of your connected DreamFlats. Use the left and right brackets to secure the DreamSweep frame to the back DreamFlat assembly, creating a stable sweep structure.

Step 6: Install the Silicone Edge Backdrop (Figure 5).
Starting from the top of the wall, insert the silicone edge of your backdrop into the recessed groove of the DreamFlat frame. Continue downward, pressing the silicone edge into the channel along the DreamSweep frame until it fits smoothly and securely.

Your DreamSweep is Ready!
Confirm that all connectors are tight and that the transition from wall to floor forms a smooth, continuous curve. Your DreamEasy DreamSweep is now fully assembled and ready for a flawless, professional setup — perfect for full-body portraits and creative studio designs.

There are ENDLESS ways to arrange your DreamEasy DreamFlats! Whether you're crafting a stunning layered look, setting up a dramatic corner, designing a shower or window scene, or positioning them at an angle or in parallel—whatever you envision, these incredible DreamFlats guarantee a picture-perfect shot every time!

The photographers and designs in the images are in clockwork order:
April Massad used the DreamEasy DreamFlat Solo with Abstract Pastels Skinny (WM)

Olguta Goddard of oh my goddard photography photographed both the second and third images using the DreamEasy DreamFlat Duo with Skinny Solo Edith (LL) and four DreamFlat frames with Skinny Luxe Cleopatra (LL).

DreamFlat frames can be combined together with our 90° DreamEasy Corner Connectors to create a clean, professional, perfectly stretched corner. No tools are required for assembly. 

Steps for using the 90 DreamEasy Corner Connectors:

Step 1: Position your DreamFlats in the corner orientation of your choice.

Step 2: Select the corner connector that aligns with the opposite direction of the 90° angle of your DreamFlats. Insert it into the holes at the top of both DreamFlats. The corner connector should match Figure A.

Step 3: Attach the remaining corner connector at the bottom of your DreamFlats. A foot is not needed, as the corner connector will securely hold the frames together. This setup should match Figure B.

Step 4: Use the plastic side connector pieces to ensure a snug fit between the two frames. Refer to Figure C.

Note: Position the plastic side connectors at approximately 1/4 and 3/4 of the way down the frame.

The 180° DreamEasy Straight  Connector and Foot connects the DreamEasy DreamFlat panels horizontally to create a clean, professional, perfectly stretched wall. No tools are required for assembly. 

Steps for using the 180° DreamEasy Straight Connector and Foot:

Step 1: Position your DreamFlats next to one another.

Step 2: Insert the 180° DreamEasy Straight Connector into the holes at the top of both DreamFlats, connecting them together. The straight connector should match Figure A.

Step 3: Place the included foot between the bottom of the two frames, inserting the two pegs into each DreamFlat. This will securely hold the frames together. This setup should match Figure B.

Step 4: Use the plastic middle connector pieces to ensure a snug connection between the two frames. Refer to Figure C.

Note: Position the plastic side connectors at approximately 1/4 and 3/4 of the way down the frame.

Now, you're ready for those 8', 10', 12' and 20' Silicone Edge Backdrops! Get shopping!